Our Services

• Domestic & Commercial
• Fault Finding & Repairs
• 3 Phase Commercial Circuit Faults
• Immersion Heaters
• Fuse Board Replacement
• New Installations
• Test and Inspection
• Landlord’s safety checks
• Portable Appliance Testing (PAT Testing)
• Computer Network Design & Installation

Rewires

All rewires will comply with the BS7671 regulations and include new cabling and fittings, new consumer unit including MCBs and RCD. All relevant bonding to BS7671 regulations. Full IEE certificate on completion.

Fault Finding

Domestic and Commercial
Fault finding to power and lighting circuits
Immersion heaters
Fuse board problems
Low voltage lighting faults
Blown fuses – tripping MCBs
RCD faults

New Installations

Full rewires
Low voltage lighting
New shower circuits
New cooker circuits
Outside lights/sockets
Additional power sockets
Wiring of outbuildings/workshops
3 phase installations
New light fittings
Upgrade of consumer units (to include RCD and MCBs)
Updating of Earth Bonding
Testing and Inspection

Inspection & Testing to BS7671

We provide inspection and testing of fixed electrical installations and equipment (up to and including three phase 415V ac circuits), in domestic, commercial and industrial environments, in accordance with BS 7671 2008 (Institution of Electrical Engineers (IEE) Wiring Regulations - 17th Edition).

Periodic Inspection

All electrical installations should be inspected and tested on a regular basis. The time interval between inspections is dependent on the type of installation e.g. domestic installations may be a maximum of 10 years whilst a construction site may require inspection at 3 monthly intervals. The periodic inspection and test includes a thorough visual inspection looking at all aspects of the electrical installation together with extensive testing. We can inspect and test your installation and issue you with a 'Periodic Inspection Report' which, together with a 'Schedule of Inspections' and a 'Schedule of Tests'', will confirm that the installation is safe and 'fit for purpose' and will also identify any areas that require remedial work to satisfy the IEE regulations.

Routine Inspection

Regular inspections also need to be performed on electrical installations between Periodic Inspections, usually on an annual basis, as damage and deterioration can occur. To meet this requirement we offer a less comprehensive inspection which is limited to a visual inspection and some functional testing.

This is particularly suited for rental properties where there may be an annual change of tenant.

Visual Inspection

This is a low cost option particularly suited to potential home buyers. A visual inspection of the electrical installation is carried out to determine the age of the wiring and accessories, it's general condition and compliance with current standards. If the installation is found to be generally satisfactory, a full inspection including testing of circuits can be carried out if requested by the client.

Portable Appliance Testing

The Health & Safety Executive states that 25% of all reportable electrical accidents involve portable appliances. The Electricity at Work Regulations place a legal responsibility on employers, employees and self-employed persons to comply with the provisions of the regulations and take reasonably practicable steps to ensure that no danger results from the use of such equipment. We can inspect and test appliances as either part of a Periodic Inspection, Landlord's check or separately as required.

Remedial Work

Should any problems be found, these can be costed and rectified with no additional charge for a re-test.